Operational Amplifier Module Add On for BG95S
For use with the Model BG95S. Adds the following circuit areas: IC Operational Amplifiers, OP Amp Voltage Follower, OP Amp Inverting Amplifier, OP Amp Non-Inverting Amplifier, OP Amp Frequency Response, OP Amp Summing Amplifiers. The module is approximately 7" x 8" with a plastic top and the majority of the fixed parts mounted on the underside. Includes leads and the manual.   
12589820                                                          $167

AM10 Add-On AM Radio Module
This unit can be used with the BG5 A, B, C, or D to provide a complete working AM Radio when used with the existing IC amplifier module that is included with each BG5 and will add the following circuit areas:

Basic AM Receivers
Superheterodyne AM Radio
AM Receiver Servicing
Basic AM Transmitters

The module is approximately 7"x8" with a vinyl mylar top surface and the majority of the parts mounted on the underside.

Lab Manual/Text: Experiment Listing:
Amplitude Modulate Communication Systems
Basic Oscilloscope Techniques
Oscilloscope Familiarization
Oscilloscope Frequency Meter
Fundamental Radio Principles:
Intro to AM Receivers
Amplitude Modulation Receivers
Tuned Radio Frequency Receivers
TRF Tuning and Resonance
Basic AM Receiver
Functional TRF Receiver
Superheterodyne Receiver
Radio Wave Conversion
AM Detector Circuits
Narrow Bandpass Amplifiers
AM Receiver Servicing
AM Receiver Alignment
Measurements in AM Receivers
Servicing AM Receivers
AM Transmitters
Basic Transmitters
LC Sinusoidal Oscillators
Continuous Wave Transmitter
AM Tone-AM Voice Transmitter Emission

Additional Equipment Required:
Depending on your existing lab equipment, you may require an AF Generator, an RF Generator, an Oscilloscope and two Digital Multimeters.

12589811                                                          $279